SYNC MAIL DIR
Sync Mail Dir (`smd`) is a set of tools to synchronize a pair of mailboxes
in Maildir format. It is Free Software, released under the terms of GPLv3,
Copyright © 2008-2011 Enrico Tassi.
It differs from other solutions in terms of performances and lower
installation requirements. The widespread solution IMAP-server plus
requires an IMAP server to be installed. Alternatively
[Maildirsync](http://hacks.dlux.hu/maildirsync/) requires no IMAP server,
just ssh, but it used to load my laptop CPU too much and it seems its
development stopped in 2004. Other general purpose tools like rsync or
unison may work too, but not benefit from the fact that they are
synchronizing mail messages. Sync Mail Dir is similar to Maildirsync in its
design and requirements, but is more efficient, having its mechanisms
written in C (around 900 lines), while policies are written in scripting
languages like Lua and shell script (other 1300 lines).
Sync Mail Dir uses `ssh` to transmit and receive data, and to run commands
on the remote host (but in principle it could use any bi-directional
channel, like `nc` for example).
Sync Mail Dir needs to be installed on both hosts: we call server the host
we push to and pull from, we call client the host we push from and pull to.
In the most common scenario, the server is our mail server, while the
client is our laptop.
The directory `~/.smd/` contains the configuration file(s), some `fifo` needed
to short-circuit the softwares running on the client and on the server, and
a cache file (called db-file from now on) that represents the status of the
mailbox last time we successfully pushed. The configuration file is needed
only on the client host (the one that will run `smd-pull` and `smd-push`).
Sync Mail Dir is a layered set of tools, where low level tools are
implemented in low level languages (to achieve decent performances) and
high level tools are written in scripting languages (to achieve better
is a small and hopefully efficient C program that given a
db-file (a snapshot of a previous mailbox status) generates a set of
actions (a diff) a client should perform to synchronize its local mailbox
copy. It is a low level tool, not meant to be used directly by the user.
a simple script that calls `mddiff` to compute the diff,
sends it to the client and then listens for client requests like getting a
mail body or header. Even if this tool is simple to run, redirecting its
input and output to `smd-client` over a network may not be straightforward,
thus users should not call it directly.
a quite complex script applying a diff locally, eventually
requesting data to the server. In case the diff cannot be applied
cleanly, it outputs an error message that higher level tools should display
to the user. As `smd-server` it is a quite high level tool, but should not
be called directly by the average user.
thanks to ssh, it executes `smd-server` on the server host and
`smd-client` on the client host. This allows to pull remote changes and
apply them locally. The remote mailbox is left untouched. This tool is
meant to be called by the user.
thanks to ssh, it executes `smd-client` on the server host and
`smd-serer` on the client host. This allows to push local changes and to
apply them on the remote host. The local mailbox is left untouched. This
tool is meant to be called by the user.
handles common folder renaming scenarios. The tool
is meant to be used as a translator program in the configuration file
of `smd-pull` and `smd-push`.
performs a quick check that a setup, especially when it involves
some folders renaming, actually works as expected. This tool is meant to
be manually called by the user to check a given configuration file.
runs runs smd-push and smd-pull at regular intervals as defined
by the user in a configuration file, in the style of a crontab, but
catches recoverable errors (like a, non recurrent, network problem),
bailing out only in cases where human intervention is needed. This is
the utility you may want to run if you are using a textual environment or
a graphical one not based on GNOME.
is an applet for the GNOME notification area, that runs
`smd-loop`, eventually notifying the user for critical events and allowing
him to solve them by clicking on buttons instead of running commands from
Four end-user tools are provided. You need to configure them bottom-up,
starting from the simpler ones (`smd-pull` and `smd-push`), that already
allow to synchronize two mailboxes. Anyway it is recommended to use
higher level tools like `smd-loop` or `smd-applet`.
### smd-push and smd-pull
- `smd-pull [name]` to obtain the changes made on the remote mailbox applied
- `smd-push [name]` vice versa
Both tools read a configuration file in `~/.smd/config.name`, that is a simple
shell script sourced by both when called with argument `name`. If no argument
is given, they source `~/.smd/config.default`.
This file defines the following variables (see the [`smd-config`](smd-config.5.html) manpage for a complete documentation):
- `SERVERNAME` is a valid alias for ssh. It should be defined in
your `~/.ssh/config`, with compression enabled. For example:
- `CLIENTNAME` a name for your client: the host name concatenated with
the server name should be fine. Note that you can pull and push from
different hosts, and each of them needs a unique CLIENTNAME in its
- `MAILBOX` a list of roots to be synchronized. There is no support for
name mapping, thus they should be named the same on the remote host.
Maildirs will be searched starting from these roots, traversing
- `DEBUG` can be set to true to log the traffic between client and server
The first time you run `smd-pull` or `smd-push` a template file will be
generated for you.
The first synchronization can take a while, since all mail messages have to be
inspected and their hash recorded in the db-file. While it is not strictly
needed, you may want to copy a huge mailbox (hundreds of megabytes) to the
other endpoint by hand (for example zipping it with a slow but space efficient
compressor like `bzip2` and `lzma`) to save some bandwidth. `smd` is not
optimized for such a (uncommon) situation: it uses regular ssh stream
compression to transfer mails, that can be way less space efficient than
running a compression utility over the whole mailbox. Moreover, you should
not edit your mailboxes during the first synchronization, since edits may
force the software to bail out without saving the db-file, and thus making
the following run as slow as the first one.
#### dry run
From version 0.9.14, the tools `smd-push` and `smd-push` can be run with `-d`
or `--dry-run` flags, that do not modify in any way your maildir, but
can be very handy to understand which changes smd would perform if not told
From version 0.9.14, `smd-push` and `smd-pull` can run user defined
hooks before and after doing their job. Hooks are regular programs (usually
shell scripts) placed in the following directories:
Hooks receive four arguments in the following order:
1. when: `pre` or `post`
2. what: `push` or `pull`
3. endpoint: the endpoint name, usually `default`
4. status: the current status, `0` for OK, `1` for error.
pre-hooks always receive `0`, post hooks receive the value
`smd-push/pull` will return after the hooks terminate
Hooks should not fail, if they do so then `smd-push/pull` will fail too.
Sample hooks are available in the source tarball under the `sample-hooks/`.
Some documentation about [available hooks](hooks.html) is also present.
#### folder renaming
In case your local and remote mailbox names or sub-folders structure differ,
smd version 1.2.0 offers a translation functionality.
The configuration file must be changed, replacing `MAILBOX` with
`MAILBOX_LOCAL` and `MAILBOX_REMOTE`. Moreover two translator
programs must be defined:
- `TRANSLATOR_RL` to translate remote names to local ones
- `TRANSLATOR_LR` to translate local names to remote ones
A translator is a program that receives in standard input one or more
and must print on standard output a corresponding folder name
on success, or prints the string `ERROR` followed by a new line
and an optional following error message otherwise end exists returning 1.
Note that the folder names will be complete of the `MAILBOX_LOCAL` or
`MAILBOX_REMOTE` part and will always terminate with `cur`, `new` or `tmp`.
For example, consider the following configuration file:
When `smd-pull` is called, `remote_to_loc.sh` is called to translate names
like `Maildir/cur` or `Maildir/.sub.folder/new` to local names like
`Mail/cur` or `Mail/sub.folder/new`. An example of `remote_to_loc.sh`
sed 's/^Maildir\(.*\)$/Mail\1/' | sed 's?/\.?/?'
Translating the way back is trickier, since the leading `.` must be
added only to sub-folders:
if [ "$1" = Mail/cur -o "$1" = Mail/tmp -o "$1" = Mail/new ]; then
echo $1 | sed 's?^Mail/\(.*\)?Maildir/\1?'
echo $1 | sed 's?^Mail/\(.*\)?Maildir/.\1?'
while read M; do t "$M"; done
Last, translators are executed as external programs, thus they must be
present in your path (for example in `~/bin/`) and have the executable
bit set (`chmod +x`).
To check your setup you can run the `smd-check-conf` utility.
The test consists in listing local and remote mailboxes, calling
the translators, displaying the result to the user and checking for
round trip (i.e. that the translators programs behave as inverse
functions on the current input).
You can also test your setup using the dry-run mode with
`smd-push -d` and `smd-pull -d` and examine their output.
This anyway should be tried before the first pull/push, and thus
may take a long time depending on the size of your mailboxes.
To avoid common mistakes in writing translators, some recurrent renaming
scenarios are handled by the `smd-translate` utility.
Assuming the `MAILBOX_LOCAL` configuration variable is set to `Mail`
and the `MAILBOX_REMOTE` is set to `Maildir`,
One can use the following configuration file snippet as a reference,
where default must be repaced with the endpoint name:
TRANSLATOR_RL="smd-translate -m oimap-dovecot -d RL default"
TRANSLATOR_LR="smd-translate -m oimap-dovecot -d LR default"
`smd-loop` runs `smd-push` and `smd-pull` at regular intervals as defined
by the user in the `~/.smd/loop` configuration file. On errors that
are reported to be transient, its retries a second time before failing.
The first time you run `smd-loop` a sample config file is created for you.
The configuration file is line oriented. Each line is composed of three space
Frequencies are expressed in minutes, while endpoint
name is a valid name for `smd-pull` and `smd-push`. Lines
beginning with # are considered as comments. The following example
calls the command `smd-pull default` every 3 minutes, and `smd-push default`
# pull-frequency push-frequency endpoint-name
3 10 default
smd-applet just runs `smd-loop`, notifying the user if errors occur. It
can be run with `--configure` to pop-up its configuration window, that
allows to tune its notification behaviour and to edit the configuration
files for `smd-loop` and `smd-push/pull`.
Notes on performances
On my core duo 2 laptop equipped with a 5400rpm hard drive and with an hot
cache, copying a 150MB mailbox with `tar cf - Mail | ssh -C localhost tar
xf -` takes 17 seconds. Doing the same with `smd-pull` takes 19 seconds.
This is clearly an uncommon workload, since you rarely get 150MB of new
mails, but it shows the extra work the tool is doing (like computing
`sha1` sums for every mail, or the client-server protocol overhead) makes
`smd` not so inefficient. Once the mailbox has been copied, running
`smd-pull` again to check for updates is almost instantaneous.
From verion `0.9.4` multiple configuration files are supported. This means
you can push/pull from/to different remote mailboxes (one at a time). This
turned out to be useful when migrating a mailbox:
Note that you can run this for a while, not just one time. This can make the
transition from a mail-address to another smooth, since simply forwarding mail
from the old to the new one makes you believe you changed the subscription to
all your mailing lists, that is obviously not always the case since nobody
remembers all the mailing lists he is subscribed to.
Syncmaildir is part of the Debian archive. If you are running Debian or one of
its derivatives, you can install the `syncmaildir` and `syncmaildir-applet`
packages with your favourite package manager.
If you want to install it from source you need a C compiler, the development
files for GLib, GNU make and sed. For `smd-applet` you also need the Vala
compiler, libgee, GTK+ 3, GConf, libnotify and dbus-glib. You may also want to
customize few variables in the `Makefile`. Then typing `make && make install`
should be enough to have syncmaildir installed. Some known platforms are
supported by templates defined at the end of `Makefile`, for example you may
want to run `make osx/text/all && make osx/text/install` to properly build and
install text mode only syncmaildir utilities on an MacOSX platform.
Runtime dependencies are: `ssh`, `xdelta`, `lua5.1` and `bash`.
Moreover some core utilities are also needed: `sha1sum`, `mkfifo` and `mkdir`.
The design of the software is detailed in the [design document](design.html).
If you are interested in hacking `smd`, it may be helpful.
The software can be download from the Source Forge
The software is distributed as-is, with no warranties, so if your mailbox
is irremediably lost due to Sync Mail Dir, you will get nothing back, but
you can complain with me, of course. If you find the software useful,
an happy-user report is also welcome. For patches, bug-reports, etc. refer to
Enrico Tassi, login gares on fettunta dot org.